Tag: Sys Admin

Problem How to remove NO_HW devices from ioscan in HP-UX without a reboot? Solution You can remove the “NO_HW” devices from ioscan by using the command rmsf -k -H <hw_path> and there is no need to reboot the HP-UX system. I have done this on HP-UX 11.31. …

The utility “openssl” is used to generate the key and CSR. This utility comes with the OpenSSL package and is usually installed under /usr/local/ssl/bin. If the utility was installed elsewhere, these instructions will need to be adjusted accordingly. In this example, CSR was generated for Apache …

Static routes are for traffic that must not, or should not, go through the default gateway. Routing is often handled by devices on the network dedicated to routing (although any device can be configured to perform routing). /etc/sysconfig/network-scripts/route-eth0 Add Static Routes in Linux If static routes …

You can share the file or folder with specific people from your windows server 2008 system by the process as shown below: Share Windows Folders Right Click on the folder and select option Share With >> Specific People Select the user from the drop-down list and …

You can remove the GRUB Password after login into the system, follow the steps given below: Login into the system through root user. Open the grub.conf file into vi editor. # vi /boot/grub/grub.conf OR # vi /etc/grub.conf Comment the password line in the grub.conf file or remove this …

The Mac Task Manager Task Manager of Mac OS X is called Activity Monitor. You can find the status of the system like CPU uses, Network info, Disk info etc. through Activity Monitor. You can also kill a process through Activity Monitor. Remember, the Task Manager …

To generate and collect the InSplore Logs from an HP 3PAR Storage System, follow the below steps:  How to generate InSplore Logs Open the Internet Browser and type the IP address of the HP 3PAR Service Processor. Log in to HP 3PAR Service Processor Onsite Consumer Care (SPOCC) …